Direct control. Open design freedom.
Mechanical ethanol burners in linear, geometric, freestanding and tabletop formats for architectural projects and custom programmes.
Fewer systems between the hand and the flame.
The manual range removes the RX and KT smart-control architecture and focuses on a real ethanol flame, mechanical operation and stainless-steel forms that can be coordinated with the surrounding space.
Choose the format first, then confirm the exact burner, lid, handle and enclosure before cutting or fabricating the project opening.
Start with the spatial idea.
Each format serves a different architectural condition. Product geometry and operating access remain governed by the selected model and confirmed order drawing.
Long, quiet fire lines
For hearths, media walls and custom built-in openings.
View models
A compact focal point
For geometric surrounds, islands and custom fire features.
View models
Fire viewed in the round
For circular islands, hospitality tables and portable features.
View models
A complete fire object
For spaces that need a positioned focal point rather than a built-in opening.
View modelsSix routes into the project.
Review the current product formats, then request the delivered dimensions and confirmed drawing before finalising the opening.
-
Sale!
FW Framed Freestanding Bioethanol Fireplace | Custom
Original price was: ¥7,400.00.¥7,200.00Current price is: ¥7,200.00. Add to cart -
Sale!
GT Lift-Lid Manual Bioethanol Burner | Stainless Steel
Original price was: ¥1,540.00.¥1,500.00Current price is: ¥1,500.00. Add to cart -
Sale!
Linear Manual Bioethanol Burner with Glass Screens | OEM / ODM
Original price was: ¥3,220.00.¥3,200.00Current price is: ¥3,200.00. Add to cart -
Sale!
Round Tabletop Bioethanol Fireplace | Custom 300–1000 mm
Original price was: ¥3,640.00.¥3,600.00Current price is: ¥3,600.00. Add to cart -
Sale!
RX Round Manual Bioethanol Burner | Custom Stainless Steel
Original price was: ¥3,600.00.¥3,500.00Current price is: ¥3,500.00. Add to cart -
Sale!
Stainless Steel Ventless Fireplace Burner Insert | 1000 mm
Original price was: ¥5,000.00.¥4,800.00Current price is: ¥4,800.00. Add to cart
Simple operation still needs precise coordination.
The control system is direct, but the opening, support material, operating access and delivered dimensions remain fundamental.
Delivered dimensions first
Verify the actual burner, lid, handle and enclosure against the approved order before cutting the opening.
Non-combustible support
Use stone, metal, firebrick or another suitable high-temperature non-combustible construction.
Mechanical access
Keep the burner level and ensure the dedicated shut-off lid and operating tool can move freely.
Programme configuration
Coordinate size, form, finish, enclosure and packaging for project, distributor and OEM / ODM supply.
Plan the opening and operating zone.
All figures below are general planning references. The delivered product, approved drawing, order confirmation and sales contract remain authoritative.
Installation reference
- Opening allowance
- Approximately 5–10 mm around the enclosure
- Support construction
- Stone, metal, firebrick or another high-temperature non-combustible material
- Heat-sensitive finishes
- Keep outside the approximately 500–800 mm zone around and above the opening
- Final verification
- Check the delivered burner, lid, handle and enclosure before cutting
Fuel and operating essentials
- Specified fuel
- 95% bioethanol only
- Refilling condition
- Flame fully out and appliance cooled below 40°C
- Operating method
- Use the dedicated shut-off lid and supplied operating tool
- Critical warning
- Never refill a burning or hot appliance
Wipe every spill and allow vapour to disperse completely before ignition. Full procedures are provided in the user manual.
Outdoor use, care and warranty
The range is principally designed for indoor use. Outdoor projects require reliable rain, drainage, corrosion and wind protection. Do not operate in strong, gusty or uncontrolled airflow.
The standard warranty is one year from delivery. A written sales contract with different terms takes precedence.
The burner recedes. The space takes over.
Use these applications as spatial references only. The selected model and approved drawing govern the final product and installation.
Installation and operation manual.
Read the complete English manual for safety warnings, installation, filling, operation, care, transport and support procedures.
Before you specify.
Does the manual range use RX or KT smart controls?
No. Manual products use direct mechanical operation. Confirm the exact lid, handle and enclosure arrangement for the selected model.
Can dimensions and finishes be customised?
Yes. Size, shape, finish, enclosure and packaging can be coordinated for project, OEM and ODM production. Installation must follow the delivered product and approved order dimensions.
Can a manual burner be used outdoors?
The products are principally designed for indoor use. Outdoor installation requires reliable rain, drainage, corrosion and wind protection, and operation must stop in strong or uncontrolled wind.
Can the opening be cut from a general catalogue size?
No. Verify the delivered appliance, shut-off lid, operating tool and approved order dimensions before cutting or fabrication.
Bring us the opening. We’ll shape the burner route.
Send the dimensions, preferred form, finish, quantity, application and destination. We will return the relevant model route and quotation requirements.
Request drawings & quotation