Ethanol fireplace installation.
Use the exact model drawing and supplied instructions to review the opening, support and operating access.
Open drawing references
Ethanol fireplace installation drawings.
Details
The document library contains family manuals and named standard linear references. Send the selected model, site section and required document format when requesting the drawing for your project.
Preview the reference drawing
Reference compilation dated 2026-09-25. Obtain the approved current model drawing for construction.
Open the source PDF
Reference compilation dated 2026-09-25. Confirm the source revision and required depth for the supplied unit.
Open the source PDFModel and supplied assembly.
Details
Identify the full model, selected size, controls and supplied enclosure. Keep the current drawing revision with the quotation. A standard linear burner reference applies to the model it names; a decorative assembly may need its own complete drawing.
Overall dimensions
Details
Record the burner, top plate, frame, glass and complete assembly dimensions relevant to the supply. State the part each measurement describes.
Construction opening
Details
Copy the opening length, width and depth from the applicable drawing. Coordinate any tolerance with the supplier and fabricator before cutting.
Section and access
Details
Show the supporting structure, surrounding finishes and operating or service path. Coordinate the services and ventilation provisions specified for the model.
Opening, support and access checklist.
Details
Review the drawing with the designer, fabricator and relevant installer before releasing stone, metalwork or joinery. Installation conditions vary by model and enclosure.
View checklist
- Exact model, supplied assembly and drawing revision
- Overall dimensions, opening and required depth shown separately
- Stable support and specified non-combustible surrounding materials
- Model-specific clearances and placement requirements
- Any required electrical supply, ventilation and cable route
- Access for filling, operation, removal and servicing
- Applicable instructions and local project requirements reviewed
Operation and handover.
Details
Assign responsibility for operation and supervision, provide the applicable fuel and refuelling instructions, and retain the manual with the model reference. Follow the supplied instructions for shutdown, cooldown, filling and fault handling.
Questions.
Does this guide provide a universal fireplace cutout size?
Each model and assembly has its own drawing. Use the confirmed opening dimensions, support, clearances and services for the exact configuration being supplied.
Can I use the nominal model length to cut the surround?
Use the model drawing for fabrication. Nominal length, top plate, installation opening and complete enclosure dimensions are different references.
Do all smart and manual burners need the same services?
Service requirements depend on the model. Review the applicable drawing and instructions for power, ventilation, access and the complete installation arrangement.
Who should review the installation before fabrication?
The supplier, designer, fabricator and relevant installer should coordinate the exact model and drawing with the proposed site and local requirements before fabrication is released.
Still choosing the burner
Choose the operating method and supplied assembly before finalising the installation brief. These links are starting points for selection, not confirmation that a model fits your site.
- For a linear burner with touchscreen, remote and Android App control, review the SXKT-001 smart ethanol burner and its listed configuration sizes.
- For a linear burner with on-unit and remote controls, compare the SXRX-L-005 smart ethanol burner. SXRX supports Wi-Fi connectivity. Confirm the supplied control package for the ordered model.
- For a manual lift-lid operating method, review the RX Manual Lift-Lid Burner. Check the supplied lid, operating tool and access requirements for the selected configuration.
To compare a wider range of shapes and product forms, explore the bioethanol fireplace and burner collection. If you need a complete enclosure or a non-standard form, use the custom ethanol fireplace planning page to define what should be supplied.
After selecting a model, return to the model manuals and drawing references. Match the family, exact configuration and document revision. A product photograph, nominal length or standard reference PDF is not approval to cut the surrounding materials.
Request a model-specific installation review
Prepare the following information for your project enquiry:
- The exact model or shortlisted models, selected size and control method.
- A dimensioned plan and section showing the proposed opening, support, surrounding materials and any fixed site constraints.
- The requested supply scope: burner, enclosure, frame, glass and controls, as applicable.
- The intended access for operation, fuel handling, removal and servicing, plus any known electrical or ventilation provisions.
- The project location and the drawing revision you are currently using.
Request a model-specific installation review. Identify the relevant drawing in the enquiry and provide it with the project information. The designer, fabricator and relevant installer should coordinate the exact supplied assembly and applicable local requirements before fabrication. Use the approved current model drawing and supplied instructions for the final installation.