SXKT Startup Guide
What happens before the flame appears?
The live SXKT specification describes a 3–15 minute warm-up while bioethanol is heated and vaporized for ignition.
A simple startup timeline
1. Start
Use the documented control sequence and remain with the appliance.
2. Warm up
Allow the listed 3–15 minutes for sufficient fuel vapor to be generated.
3. Operate
After ignition, use the verified output controls as instructed.
Read the LCD as three separate signals
| Live display item | What it helps you understand |
|---|---|
| Remaining fuel level | The fuel status being reported by the system. |
| Indoor temperature | The environmental temperature reading on the interface. |
| Flame output percentage | The selected operating output after startup. |
The listing also describes voice status and fault prompts. A display does not replace the supplied manual or supervision; respond to faults using the manufacturer’s documented guidance.
Startup is not the same as flame adjustment
The live product page specifies stepless adjustment from 10% to 100% and a listed 50–400 mm flame-height range. These describe the operating flame. Selecting a different percentage does not remove the initial gasification warm-up.
Handover checklist
- Show where the supplied manual and fault guidance are kept.
- Explain the verified 3–15 minute warm-up.
- Identify the three LCD readings.
- Demonstrate only controls included with the ordered configuration.
- Keep the unit supervised and the surrounding area clear.
- Follow specified fuel, ventilation, refilling and local safety requirements.
The package currently lists a wireless remote and manual with app instructions; WiFi and smart-home integration are described as optional. Confirm the exact ordered configuration. For related planning, compare SXRX and SXKT control experiences or review SXKT feature-wall sizing.
Design the warm-up into the experience
Review live sizes and configuration details before specifying the SXKT.