Three Linear Bioethanol Fireplace Inserts, Three Different Cutouts
RX1000, KT1200 and RX1200S drawings show why visible top plate sizes and construction openings must be coordinated separately before fabrication.
- Author
- Liang Ethan
- Technical lead
- Liang ZhengXiangAll models
- Published and reviewed
On this page
One nominal length.
Different construction openings.
Record the nominal length, visible top plate and construction opening separately for each linear ethanol fireplace model.
Three models, three openings
Figures transcribed from the named installation drawings. All dimensions are in millimetres. These are examples for these exact models, not a general cutout standard for bioethanol fireplace inserts.
01 · Smart fireplace
RX1000
TOP PLATE
1000 × 250 mm
INSTALLATION OPENING
980 × 220 mm
Depth greater than 250 mm
02 · Ethanol fireplace
KT1200
TOP PLATE
1200 × 260 mm
INSTALLATION OPENING
1170 × 230 mm
Depth greater than 250 mm
03 · Manual fireplace
RX1200S
TOP PLATE
1200 × 180 mm
INSTALLATION OPENING
1170 × 160 mm
Depth 110 mm as drawn
Opening details from the supplied drawings
Select an image to view the original-size excerpt. These cropped references illustrate the dimensions stated above; request the current complete drawing before fabrication.
RX1000 · 980 × 220 mm
Opening plan · source drawing title block 2023-07-07
KT1200 · 1170 × 230 mm
Opening plan · source drawing title block 2024-07-15
RX1200S · 1170 mm length
Opening elevation · source drawing 2021-06-09
RX1200S · 160 mm width / 110 mm depth
Opening section · source drawing 2021-06-09
Read the section, not only the top view
The RX1000 drawing shows a 400 × 20 mm bottom ventilation opening and a right-hand 220 V outlet location. KT1200 also shows a bottom ventilation opening and a right-hand electrical outlet, but its bottom opening has no dimension in this drawing. Its “2 KW” electrical label should be checked with the manufacturer and electrical designer before it becomes a project specification.
The RX1200S drawing instead calls for the opening perimeter to be sealed and identifies the manual unit as 304 stainless steel. It does not show the same electrical or ventilation details; that absence is not a general exemption for other products or installations.
Each drawing calls for non-combustible installation materials. The RX1000 and KT1200 views also mark space above the fire; the exact project clearance must be checked against the current issued drawing and proposed enclosure. Do not transfer a clearance, air opening or power detail from one model to another.
Before the fabricator cuts
- Model and revision: identify the ordered model, configuration and date of the manufacturer drawing used for coordination.
- Three separate dimensions: show the visible top plate, rough opening width and length, and required depth. State which callouts still need a tolerance decision.
- Section details: locate support, non-combustible finishes, any specified ventilation opening and electrical outlet without covering the service or operating path.
- Release point: have the supplier, designer and fabricator confirm the final drawing before stone, metalwork or joinery is cut.
The RX1000 PDF filename bears a 2024 date, while its drawing title block shows 2023-07-07; the other title blocks show 2024-07-15 for KT1200 and 2021-06-09 for RX1200S. Those are version clues, not proof that any file is the latest production revision. For the broader distinction between catalog sizes and fabrication dimensions, see our SXRX burner size and cutout planning guide.
Need a project-specific opening?
Send the exact model, finish, enclosure section and project location with your inquiry. We can review the applicable current drawing before your team releases the cutout.
Explore related series: smart fireplaces and manual fireplaces. These are series pages, not confirmed product pages for the drawing models above.
Compare linear ethanol burner formats when choosing the assembly for a new project; use the exact model drawing for fabrication.