SXRX-Y-002 Round Smart Bioethanol Burner Size Guide
A drawing-review guide for the ten SXRX-Y-002 round smart bioethanol burner configurations, with special attention to the taller 300 mm and 400 mm bodies.
- Author
- Liang Ethan
- Technical lead
- Liang ZhengXiangAll models
- Published and reviewed
On this page
Check the SXRX-Y-002 in section: its ten listed configurations have two height groups, and the compact 300 mm and 400 mm formats are taller.
The size range has a meaningful break point
The active Shopify catalog identifies SXRX-Y-002 as a brushed, round, smart bioethanol burner. It publishes eight formats from 500 to 1200 mm with a 250 mm listed height, followed by two compact formats—400 × 400 mm and 300 × 400 mm. In other words, choosing the smaller visible footprint does not automatically create a shallower enclosure.
Scroll across the table to see all columns.
| Size group | Published pairs | What to coordinate |
|---|---|---|
| Standard-height group | 500–1200 mm formats, each listed at 250 mm high | Body envelope, support, ventilation, electrical and service access. |
| Compact-footprint group | 300 × 400 mm and 400 × 400 mm | The taller 400 mm body before fixing plinth or cabinet levels. |
Five coordination questions for the project team
Put SXRX-Y-002 and the selected size/SKU on the specification schedule, quotation and drawing register.
Show the full body below the visible circular top, not just the plan-view opening.
Coordinate the substrate, edge detail and surrounding finish against the approved instructions.
Confirm the supplied controls and electrical requirements for the ordered configuration. Keep access panels and ventilation paths unobstructed.
Check the burner, enclosure, optional glass, clearances and accessories as one assembled system.
A round top still needs an intentional edge detail
The brushed panel becomes a visible junction with the surround. Ask the fabricator to agree the reveal, tolerance and cleaning gap before cutting stone or metal. A controlled shadow line usually reads more deliberately than a tight, irregular site cut. The visual detail must still comply with the product’s clearance and material requirements.
Why we stop short of guessing the engineering
The live product data confirms that the two compact formats use a taller listed body, but it does not explain the internal engineering reason. That distinction matters. Smart burners integrate flame, fuel, control and safety-related components, yet the exact arrangement must come from the manufacturer’s drawing and instructions—not from a general blog post or a scaled sketch.
Fuel and installation safety remain model-specific
Use only the fuel specified for the selected configuration. Follow the supplied procedures for lighting, shutdown, cooldown and refilling; never add fuel while the burner is operating or hot. Ventilation, clearances, electrical work, fire-resistant construction and local compliance should be reviewed by qualified local professionals.
Choose the configuration before you design the cavity
Use the SXRX-Y-002 project confirmation form to request the matching drawing, controls list and production schedule. For the broader principle, see our guide to nominal burner sizes and cutout planning.